What are the Correct TPS Settings on My CB80

According to the manual, the TPS should read as follows:

Resistance reading in kOhms between terminals

1-4 ........................ 4.25-8.25k ohms

1-2 ........................ 15-35 ohms

3-4 (with throttle
valve fully closed)......... 3.5-10.3k ohms

3-4 (with throttle
valve fully opened)......... 0.3-6.3k ohms

Diag provided by Jason

Other Info:

G201S (1.6 Detom) throttle body TPS is changeover switch only. You can make into a potentiometer type by purchasing a "D" drive style TPS from Petroject P/N 25004 (A$90) or grab one off a wrecked Nissan Pathfinder for A$20. The Nissan one fits straight on with the shaft cut back a bit and gives you the original changeover contacts plus the 10k pot.