I'm replacing my CB80 headgasket, what are the Torque settings and bolt sequences for the Head? (from Mike)

Loosen in the sequence over 2 to 3 stages
(suggest 1/4 to 1/3 turn on each one)
1-8-6-4
3-5-7-2
with 1 being the head bolt nearest the driver and 2 being furthest away

for those with manuals section 5 page 56 top of page

Refit in the sequence

8-1-3-5
6-4-2-7
with 8 being the head bolt nearest the driver and 7 being furthest away

First Tightening 4.0 to 4.5 Kg-m (29 to 33 ft lbs)
Second Tightening 6.0 to 7.0 Kg-m (43 to 51 ft lbs)

Engine manual section 5- Page 56 top of page